Hornbows Vol.2- preparing the strips and the glueing, grooving- this is the gourmet- episode of hornbow- making

After having flexed and sanded 2 pairs of waterbuffalo- horn you´re really smelling strong, the smell in my nose reminds me of my first visits at the barber around the beginning 60ties. Even if protected by a mask, it will last 2 days if one will be able again to smell more than horn. I´m used to be around with animals, every morning I´ve to clean up the stable of our horses and our donkey. Donkeys could really stink heavily. I like the smell of animals much more than the smell of cheap perfumes and deos, but the smell of horn, above all when worked with blunt tools, is second to none.

Before the glueing horn needs to be grooved and precoated.  The grooving of the horn and the wooden core of a hornbow along the glue- lines is a hot topic. There are well reputated horn- bowyers confirming that there is no historical proof for such a grooving. Don´t believe them, the very opposite is true. Grooving makes much sense, the glueline will become 3- 4 times wider, a grooved cross- section is much more stable. The stability of the glue- line of a hornbow is a must, cause of its resilience the horn will always try to reconstitute its original shape. To not groove means to overlook this fact, maybe these hornbowyers are somewhat lazy. It takes half an hour per hornbow to make a proper grooving. A well done hornbow is expensive and the grooving is enforcing its quality. A well grooved glueline should be a main charcteristic when buying a hornbow.

grooving of horn- slats for the crossbow

grooving tool at work

the inside of the grooving tool

I prefer to make multi- tools. This grooving tool works for to make grooves of different width and depth. The one used for the grooving of the crossbow- slats is at the left. I use cabinet scraper- blades and made the grooves with round files or triangular files. The blade is fixed between to wooden logs of manageable size with a slot working as a guide. The slot is a bit more in width than the slats.

grooved slats- ends cut at a 45 angle

The grooved slats are cut at their ends in a 45 angle for a lengthwise overlapping.

When making a hornbow for a crossbow the slats have not to be of even thickness or length, the surfaces have to be planed and grooved. Next volume will be focused on the construction- principle of it.

When making composite bows the traditional way hideglue or fishglue is the glue of choice. Modern glues are way of being traditional, they ar poisonous and brittle. Natural glue- lines are much more durable, they don´t need flexibilizers which will discharge in the course of time. The production of natural glues is a very sense making use of what we would call waste. It´s a holistic handling of  a slaughtered animal.

There are different qualities of hide glue. Don´t use liquid hide glues. They are made liquid by  flexibilizers, the glueline will become brittle.

The best hideglue is made of the skins of cattle, its adhesive power is very high(for the experts: 450- 480 bloomgrams, 160mPas). You can get it as a granulate, the serious dealer of my choice is: Kremer in Germany.

preparing the hideglue- soaking the grains with some water for about 12 hours

Before soaking the grains I usually had to clean up the glue- pot. It´s hard to do, I soak it with warm water for to dissolve some leftovers, for the final cleanup I´ve often to use a hammer and a chisel.

Next morning add water: for a good quality hideglue you´ve to mix finally 1 time glue and 2 times water. Now the solution has to be heated up to 140 F, to much heat will destroy the collagen of the glue and it will become worthless.

I use the hot water reservoir of our kitchen stove, the glue pot fits the reservoir exactly. Such a kitchen stove is a great tool when making hornbows, for a proper glueing warmth is indispensable.

The Ottoman hornbowyers are told  to have used a bowl filled with blistering charcoal.

heating the hideglue- there are still some indissolved grains

My wife doesn´t resist such an abuse of our kitchen, cause its me to cook most times and I´m a passionate baker too, I bake bread almost every 2nd day and like to make some cake. I guess my wife has never realized that I use the kitchen stove for to make bows.

Horn is very dense, so it has to be decomposed or digested by precoating it with a thin solution of hide glue.

the thin hideglue- solution for the precoating- water: hideglue= 10:1

At least the horn has to precoated 3 times with a thin solution of hideglue. When glueing horn, bamboo and dense woods with natural glues the precoating is a must. Warmth is as important as the precoating, about 50% of all hornbow- breaks are caused by glueing failures. The horn and the glue are mainly made of collagen, as a protein, it loves warmth, but take care, 140F is the limit. I guess nobodies nose will ever forget the horrible smell of somehow burnt horn or hideglue. My nose is the best thermometer for warming hideglue and horn.

Before every glueing or precoating the horn has to be warmed!

warmth is the key for succesfully working with natural glues!!!
to warm hideglue
the kitchen stove is such a great help in making hornbows- at the same time you can keep the thin glue- solution warm and warm the hornslats in the oven
precoated hornslats looking shiny

After the 3rd precoating the hideglue is warmed up to 140F, the grooved and precoated slats are warmed, coated with the hideglue and compressed with clamps.

the first 3 parts of the hornbow for the crossbow are glued- I bet you can´t recognize any crossbow here!

Selfmade clamps go here.

Next volume is focused on the principle of construction of hornbows for crossbows, including measurements, drawforce, drawlength…………….plans.

Advertisements